Advanced Members Popular Post Voymo Posted May 18, 2017 Advanced Members Popular Post Share Posted May 18, 2017 Hello to the community, it's been long since I was active on the forum now. I have a cool power suggestion that I thought of: Opacity Power. A power which would enable you to change the opacity of an entire smiley or, on smiley combinations, the opacity of one part/effect. You shouldn't be able to make it entirely transparent but, let's say you would be able to make give any value of transparency from 50% - 100% visible. Example of smileys with that power used on them (note: opacity changes are applied by adding #oc#wXX, where XX can be any number from 00 (solid) to 50 (50% transparent)) Single XD smiley, 30% transparent: (xd#oc#w30) XD smiley with goldback and a 50% transparent glitterFX effect: (xd#goldb#glitterfx#oc#w50) What do you people think about this? Angy had the same idea as me and the graphics she provided below demonstrate what I mean. 6 Link to comment Share on other sites More sharing options...
Advanced Members ANGY Posted May 18, 2017 Advanced Members Share Posted May 18, 2017 Hello community. I want to present a suggestion, this is not the creation of a power, if not add more utility to another power. I want to work more this suggestion, but I enter the forum and I see that my idea tried to be stolen, although it was not quite and many other people know who the original creator as it is @Phinny @Sangoku and @Bleiz ¡Thanks!. (INVISIBLE) - Invisible smilies. This power is derived from an invisible owner, read more: util.xat.com/wiki/index.php?title=Invisible This feature, which I would like to be added to power is similar to the clear but not completely, would allow you to have only a 50% opacity to the smiles of xat. People would be free to choose the opacity they want to make it completely invisible. The term that would be used at the end of the power would be smilie#i. If someone else wants to add something. I would be very grateful, thanks to the chat team xat.com/xat_test for helping me with suggestions. 4 Link to comment Share on other sites More sharing options...
Volunteers SLOom Posted May 18, 2017 Volunteers Share Posted May 18, 2017 Isn't same than this suggestion? 1 Link to comment Share on other sites More sharing options...
Advanced Members Lalisa Posted May 18, 2017 Advanced Members Share Posted May 18, 2017 Why not get a colour code that would look like what you suggested ? 1 Link to comment Share on other sites More sharing options...
Advanced Members Voymo Posted May 18, 2017 Author Advanced Members Share Posted May 18, 2017 ^^ well actually this is a good idea. That would mean adding another colour power to xat. We have Red, Green, Blue & Light atm. Opacity power would also be good added into the colour code. That would mean, by what I have in my head now, example: (xd#FF00FF50) where the 50 means 50% transparancy. 1 Link to comment Share on other sites More sharing options...
Advanced Members Joshe Posted May 18, 2017 Advanced Members Share Posted May 18, 2017 Hi. Very interesting to add other functions to this power. 1 Link to comment Share on other sites More sharing options...
Volunteers Crow Posted May 18, 2017 Volunteers Share Posted May 18, 2017 The topics have been merged, since they're very similar. Voymo posted first, so he gets priority. Please edit your posts if necessary. =) Link to comment Share on other sites More sharing options...
Advanced Members Angelo Posted May 18, 2017 Advanced Members Share Posted May 18, 2017 I like this idea, it seems pretty original and could lead to some cool customizations. Link to comment Share on other sites More sharing options...
Advanced Members xAndyx Posted May 19, 2017 Advanced Members Share Posted May 19, 2017 6 hours ago, ANGY said: Hola comunidad. Quiero presentar una sugerencia, esta no es la creación de un poder, si no añadir más utilidad a otra potencia. Quiero trabajar más esta sugerencia, pero entro en el foro y veo que mi idea trató de ser robado, aunque no era bastante, y muchas otras personas saber quién es el creador original ya que es @Phinny @Sangoku y @Bleiz ¡Gracias !. (invisible) - emoticones invisible. Este poder se deriva de un propietario invisible, leer más: util.xat.com/wiki/index.php?title=Invisible Esta característica, que me gustaría que se suman a la potencia es similar a la clara, pero no del todo, le permitiría sólo tiene una opacidad del 50% de las sonrisas de xat. La gente sería libre de elegir la opacidad que quieren para que sea totalmente invisible. El término que se utiliza al final de la potencia sería smilie #i. Si alguien quiere añadir algo. Estaría muy agradecido, gracias al equipo de chat xat.com/xat_test por ayudarme con sugerencias. i do not like idea, ¿ it would not be something like fade? i ask no more Link to comment Share on other sites More sharing options...
Advanced Members LaFleur Posted May 19, 2017 Advanced Members Share Posted May 19, 2017 18 minutes ago, iWild said: i do not like idea, ¿ it would not be something like fade? i ask no more Fade has a disappearing-appearing effect, which can't be stopped. This would basically allow to lower the opacity for any smiley. Its a fantastic idea in my opinion! 1 Link to comment Share on other sites More sharing options...
Advanced Members Mencee Posted May 19, 2017 Advanced Members Share Posted May 19, 2017 Yep, I've seen this suggestion a lot in the past (I think I suggested it at one point too, on the old forum) and it'd be a great function to have imo. it isn't exactly like clear or fade but adds a see-through effect in emotes. Link to comment Share on other sites More sharing options...
Advanced Members xAndyx Posted May 19, 2017 Advanced Members Share Posted May 19, 2017 17 hours ago, LaFleur said: Fade has a disappearing-appearing effect, which can't be stopped. This would basically allow to lower the opacity for any smiley. Its a fantastic idea in my opinion! But the effect would not be the same? It would be to repeat a power, that bores a little to the users Link to comment Share on other sites More sharing options...
Advanced Members LaFleur Posted May 19, 2017 Advanced Members Share Posted May 19, 2017 22 minutes ago, iWild said: But the effect would not be the same? It would be to repeat a power, that bores a little to the users As i (and @Mencee) already mentioned and explained, this isn't like fade or clear. Fade: Clear: Opacity: 5 Link to comment Share on other sites More sharing options...
Advanced Members xAndyx Posted May 19, 2017 Advanced Members Share Posted May 19, 2017 I do not see the power clear, I still seem to fade ... just as lucky with his power and hopefully take it into account;) Link to comment Share on other sites More sharing options...
Advanced Members Mencee Posted May 19, 2017 Advanced Members Share Posted May 19, 2017 Fade is an animation that can't be stopped. Opacity is not an animation and uses different types of transparencies that won't be exactly the same as clear. Those are the differences; not the same at all. Link to comment Share on other sites More sharing options...
Advanced Members Voymo Posted May 20, 2017 Author Advanced Members Share Posted May 20, 2017 14 hours ago, LaFleur said: As i (and @Mencee) already mentioned and explained, this isn't like fade or clear. Fade: Clear: Opacity: Exactly. Link to comment Share on other sites More sharing options...
Volunteers SLOom Posted May 21, 2017 Volunteers Share Posted May 21, 2017 I think, you meant something like that? (Hard to see the difference between some of them) http://i.imgur.com/nEfcTWu.gif 3 Link to comment Share on other sites More sharing options...
Advanced Members ANGY Posted May 21, 2017 Advanced Members Share Posted May 21, 2017 23 minutes ago, SlOom said: I think, you meant something like that? (Hard to see the difference between some of them) http://i.imgur.com/nEfcTWu.gif Exactly, like this Link to comment Share on other sites More sharing options...
Volunteers SLOom Posted May 21, 2017 Volunteers Share Posted May 21, 2017 1 minute ago, ANGY said: Exactly, like this So your idea is totally possible to do. And it would with #w1, #w2, #w3 etc... 1 Link to comment Share on other sites More sharing options...
Advanced Members Voymo Posted June 1, 2017 Author Advanced Members Share Posted June 1, 2017 I'm having good hopes for this suggestion. ^^ Link to comment Share on other sites More sharing options...
Administrators Admin Posted August 21, 2018 Administrators Share Posted August 21, 2018 (xd#goldb#glitterfx#oc#w50) - opacity power This makes the whole smiley transparent, (xd#FF00FF50) - alpha power This is adding an alpha channel but only to the color areas, eg face and outline would be solid Opacity is being asked for ? Link to comment Share on other sites More sharing options...
Advanced Members Solange Posted August 21, 2018 Advanced Members Share Posted August 21, 2018 Just now, Admin said: Opacity is being asked for ? As you know, the effect of the Fade power can't be stopped, that's why this power would be something really good since it would allow us to choose an exact level of opacity, I'm pretty sure a lot of people would love this power. Link to comment Share on other sites More sharing options...
Administrators Admin Posted August 21, 2018 Administrators Share Posted August 21, 2018 Why oc rather than say op or opacity ? Link to comment Share on other sites More sharing options...
Advanced Members 6 Posted August 21, 2018 Advanced Members Share Posted August 21, 2018 (edited) 10 minutes ago, Admin said: Why oc rather than say op or opacity ? Probably because ''o - opa'' ''c - city'' and to make the code shorter, but it makes sense to just use op or opacity instead Edited August 21, 2018 by 6 Link to comment Share on other sites More sharing options...
Advanced Members Daniel Posted August 21, 2018 Advanced Members Share Posted August 21, 2018 23 minutes ago, Admin said: Why oc rather than say op or opacity ? I don't think a shortened version will cause anything but confusion (smile#opacity#w50) would be ideal. 1 Link to comment Share on other sites More sharing options...
Recommended Posts